To sign up to receive our emails, fill in the following fields and hit submit. Thanks, and welcome!
"*" indicates required fields
We’ve been asked why we control the power to molydisilicide heating elements using not only a phase angle fired SCR power controller, but also an isolation type stepdown transformer. After all, the SCR will do a good job of regulating the volts and amps required to fire the load, and the transformer is an added expense.
Here’s the reason: Molydisilicide heating elements have virtually no resistance on startup. So very low voltage and high amperage are required to fire the elements without blowing them away. This can be accomplished by using a soft start, high amperage SCR, but then you must have greater line power amps. This can be a real problem in many laboratory settings where the available incoming power can be as low as 30 amps.
Consider an example. Suppose you have a benchtop furnace that uses six heating elements in series with a power requirement of 48 amps and a nine volt drop per element. Using only a power controller, the system will require 48 amps at the wall. But coupled with an isolation type (for safety) stepdown transformer, a 15 amp power controller can be used.
But what about the added cost of the transformer? This can be offset by the lower cost of the lower amperage power controller.
Why Olsun transformers? They design our custom transformers to meet ANSI/IEEE requirements including those outlined in C57.12.01 covering general dry type transformers. Therefore short term overload capacity is designed into every unit. They can deliver 200% of nameplate load for 30 minutes, 150% nameplate load for one hour, and 125% of nameplate load for four hours without being damaged. This is important to the efficient and safe operation of our control systems because molydisilicide heating elements have exponential resistance.
Learn more about Deltech control systems, ETL certified to conform to UL508A standards by Intertek.
Deltech is a family owned small business incorporated in 1968. Members of the Stevenson family are part of the day-to-day operations in management, sales, engineering, and production.
Address:
Deltech Inc.
1007 East 75th Avenue, Unit E
Denver, CO 80229-6442 U.S.A.
© Copyright 1998 -2024 Deltech Furnaces
PRIVACY POLICY | SITE REQUIREMENTS | SITE MAP | INFO FOR EMPLOYEES
Our ongoing accessibility effort works towards being in line with the Web Content Accessibility Guidelines (WCAG) version 2.2, levels A and AA criteria. These guidelines not only help make web content accessible to users with sensory, cognitive, and mobility disabilities but ultimately to all users, regardless of ability.
This website is just part of a meaningful change in making all State of Colorado services inclusive and accessible. We welcome comments on how to improve this website’s accessibility for users with disabilities and for requests for accommodations to any State of Colorado services.